On our new bought second-hand caravan, we have a roof-mounted air conditioning, where fiberglass cover not looks good.
One can see the glass plate from below ground, and it does not look nice out. We decided it would be freshened up, and like almost new again. First we started to try some different polishing products, washing products, but it did not matter.
We remembered Nordkemi produces many products for campers, so we got contacted Nordkemi for help, and Nordkemi was quick and very engegeret and competent advice to us.
We had a good dialogue, and was asked some very pertinent questions as bla. is the surface rough, etc., after various issues as well as a good dialogue we were told which products we should use for, To achieve a good result.
Nordkemi's products for camping is designated “Camp-System”, and above products can be purchased from most caravan dealers – Have a dealer it does not, he can certainly purchase just the product you want.
The products we got recommended , and that we use are all from Nordkemi, and covers the following products:
• Camp System (Camp-Clean)
• Plet fjerne (Camp-Clean Yacht)
• Camp System (lakforsegler)
Nordkemi's website you can find here via this link:click here – Link til Nordkemi
We started to use the Camp System (Camp-Clean), and used the recommended mixing ratio. We came Camp-Clean liquid into a bowl which we took to the roof of the caravan along with a household sponge.
Remember to cover the round air conditioning, we used paint plastic, and a cover piece may.
Subsequently, the liquid was applied to a small area of the cover Air-conditioning, we used the green side of household sponge, the dull rough surface removed. View photos:
Remember to wipe clean with a cloth all the time and before new liquid ongoing.
Now we use Nordkemi stain remover, to take the last discoloration which sits on the surface (Stain removal is Nordkemi Yacht product).
Fjeneren stain is applied with a small sponge, we used a kitchen sponge, to be a thin layer so that it becomes damp, but it must be kept moist for at least 2-5 minutes, so you must comply with the sponge a few times to ensure it is kept it moist. Wipe the surface clean with a cloth eventually:
Now we need to protect Aircon cover with a langtidsholbar protection wax, we use Camp System sealers from North Chemical which is a thin liquid wax which is easy to work.
Nordkemi provide the following information about the product:
Is a specially developed long-lasting protective wax for all types
fiberglass, aluminum and lacquer. Protects against sun and pollution. Provides
brilliant polished surface and retains the carriage as new. Leaves no residue on hammered surfaces. Siliconefri. Used in concentrate.
The picture below shows the final result after applying the Camp System sealers, see how beautiful the result is now shining surface, and now have a smooth attack which is not as susceptible to dirt, sol m.v.:
Our Aircon fiberglass cover will in future be applied sealers 1-2 times a year for protection against sun and pollution. The antenna also got cleaning final sealers 🙂 .
NB. Remember to participate in the vote, You can also write your possible. comments / experiences at the bottom.
click here – Link to the polls together