Honeywell carbon monoxide alarm XC70 – CO alarm m. light and sound alarm indicator – 7 year batterilevetod and warranty. news: Alarm Scan App
Honeywell carbon monoxide alarm XC70-EN is battery powered by 3 V lithium battery with about. 7 years of life, that is sealed inside the detector. Honeywell carbon monoxide alarm XC70-EN is a safe choice of Carbon monoxide alarm for your home or for instance in your boat and caravan / camper – You get quality and battery life of approximately. 7 year 🙂 . As you can see below, it appears on the outside of the box to battery life and warranty until May 2027 🙂 .
XC70-DA has now come with a novelty: Alarm Scan App with wireless data transfer
Honeywell's X-Series Alarm Scan App allows users of any X-Series alarm * to download data from alarm to a smart device, where you can examine the events and generates reports.
That is how it works:
Once you have downloaded and installed the X-Series Alarm Scan App on your smart device, press the app icon to launch the app.
At the first use of the app you will see a blank screen service history with an opportunity to start a new service. If you click on “choose”, you can delete or share servicehistorikrapporter.
Enable data transfer on any X-Series alarm indicated by the Alarm Scan logo by pressing the device button three times (The round button on carbon monoxide alarm).
After a few seconds after you press 3 times the round button this information is – You should answer yes to the microphone must be used for this app:
Once it has found the alarm you come to this photo:
Now you can choose where the alarm is located in the caravan / motorhome, boat or home – We have chosen kitchen. You writing a text in the bottom field, Here we have written XC70 but could just as well be Te-Kitchen:
Skip to reports, and you see the picture below which shows the alarms we have connected, pt. has a XC70 🙂 .
When you press the alarm that you want report, in this case we have only one and choose one which appears of registered alarms. Now you can view all the information that bla. Serial Number, battery status, alarm status on several levels just some of the information and reports you can view and save or print.
Within seconds a unit report. You may decide to transfer data from multiple devices in the setup and combine unit reports in a service report. Service report can be shared via email or Gemmes directly skylagerplads such OneDrive and Dropbox.
This quality carbon monoxide alarm has approval acc. BS EN 50291-1:2010 (household appliances) and also in accordance with. BS EN 50291-2:2010 (recreation), which cover the use of these detectors in the recreational vehicle / craft, such as. boats and motor.
Download data sheet or user manual:
Carbon Monoxide Alarm with 7 year battery life and warranty.
Husk CO (carbon monoxide) is dangerous:
CO (carbon monoxide) is an invisible and odorless gas !
CO (carbon monoxide) developed naturally in combustion processes, and the risk occurs when such gas furnace and gaskøleskabe not burn properly.
The problem with carbon monoxide occurs, if combustion takes place properly, and combined with a leaky, or to stop vent, wherein the flue gas and thus possibly the CO. have the ability, to be discharged into space, where you stay.
The following symptoms may stem from carbon monoxide poisoning:
• 35 ppm: This is the maximum allowable concentration of CO, as a healthy adult should be exposed to a continuous period of 8 timer.
• 200 ppm: Slight headache, fatigue, dizziness, nausea after 2-3 timer
• 400 ppm: Frontal headache during the 1-2 timer, for life threatening 3 timer
• 800 ppm: Dizziness, nausea and convulsions within 45 minutes. Unconsciousness within 2 timer. Death in the 3 timer.
• 1600 ppm: Headache, dizziness and nausea in the course of 20 minutes. death within 1 time.
• 12800 ppm: death within 1-3 min.
There are various carbon monoxide detectors on the market:
If a carbon monoxide alarm will not give an alarm, it does not exclude, that there may be CO (carbon monoxide) in other areas. A carbon monoxide alarm can not replace other alarms, such as smoke alarms and gas detectors.
What is carbon monoxide alarm should choose:
When purchasing carbon monoxide alarm should definitely choose the best, Here you may not save money.
Before choosing our carbon monoxide alarm, we had some requirements to be met: it should be excellence, so we are sure it works as it should. Our requirements are also, we do not want it to be connected 12 It was eller 230 volt. We want a carbon monoxide alarm in battery operation with long life and long warranty period.
We have previously purchased alarms in the cheap end, but did not appear durability was as good, and you lose confidence, as well as the security is desired.
We therefore now for the best on the market, so we are sure it works as it should, so we can have the peace of mind, we want by having carbon monoxide alarm.
We want a “carbon monoxide alarm in battery operation with long life and guarantee” – Yes there are high demands we place 🙂 . Men der findes kuliltealarmer alene på batteridrift fra Honeywell med 7 year lifespan and warranty, which comply with our demands.
Choose only the best for your home or boat, caravan / camper – When you select Honeywell carbon monoxide alarm you get quality, safety and security and with 7 year lifespan and guarantee you'll have peace of mind and security in order.
Honeywell Carbon Monoxide Alarms (CO) which meets all our requirements for a carbon monoxide alarm:
• Top quality – Also used in public institutions
• With built-in battery “life & warranty” on 7 year (No connection to 12 It was eller 230 volt)
• Do not replace batteries in the lifetime, 7 year 🙂
• Maintenance free, and no parts need to be replaced
• You can easily move monoxide alarm over into a new home, boat, caravan / camper
Honeywell har i over 50 years been a leading manufacturer of industrial and commercial gas detection systems, typically used in the harshest environments in the world – Oil- and gasplatforme, refineries, utilities, military applications and semiconductor industries, to name but a few. Honeywell has more than 20 years used its expertise in gas detection not only to develop the first carbon monoxide alarm for housing, but also to become one of the leading manufacturers of carbon monoxide detectors in the world. Source: Honeywell
• High reliability
• Own proven sensor technology with long life
• Third-party certified by BSI to EN50291-1:2010 and EN50291-2:2010
• Sealed enclosure to protect against adverse environmental conditions
• Alarm Memory
• Event Logger
• Optional pre-alarm
• Low level monitoring mode
• Signal for end of life
• Driftomgivelser: temperature -10 °C – +45 °C
• 30-95 % relative humidity (noncondensing)
• Size 100 x 72 x 36 mm
• Weight 135 gram
news: Alarm Scan App – Now available with the scan app that within seconds a unit report. You may decide to transfer data from multiple devices in the setup and combine unit reports in a service report. Service report can be shared via email or saved directly to skyrum as OneDrive.
The above just to name a few.
First impressions of the product:
The outer packaging gives a good impression of product quality, and when you open the package and take carbon monoxide alarm out of the box, is no doubt about it's quality you have to do.
Includes carbon monoxide alarm, mounting bracket,a small bag with a fastener and a bracket for wall attachment. In addition, included a very detailed user guide. Nothing is left to chance, you will find all the information you need, and you do not find information elsewhere on the Internet than from the manufacturer. since everything stated in the user manual.
It is also clear, carbon monoxide alarm is suitable for use in homes, caravans, static caravans, motorhomes and boats.
Smart and good details:
Assembly can be performed in two ways, You can choose to secure the bracket (back) directly to the wall, You can also use the little black gizmo that has the function, you can easily take down your carbon monoxide alarm without having to press the carbon monoxide alarm ago, Thus it is released from the backing. This installation should only be used in your home or if you're caravan / camper is situated. Are you driving with your caravan / camper should be mounted fixed.
Here are the different mounting options.
A further details as who is super smart and good, is that the battery is not loaded until you have installed carbon monoxide alarm is fixed to the rear cover (mounting bracket). When installing carbon monoxide alarm and fittings, activated battery (Smart) 🙂 .
The battery is activated only when you have placed carbon monoxide alarm in the stand bracket (Smart).
When the carbon monoxide alarm sounds the alarm, you will on carbon monoxide alarm see, it glows red off “alarm”, and if mistakes will the bright yellow next to the text error. In the same way if it detects too much carbon monoxide, To the lysis next to the text “vent” the carbon monoxide alarm.
You will always see, why it gives alarm, and what you should do.
On the back of the carbon monoxide alarm is possible to write when one has always imbued his carbon monoxide alarm.
In the box, it is apparent, when to switch to a new carbon monoxide alarm. In this carbon monoxide alarm, it is apparent, it should be replaced in May 2027.
Med scan app kan du se i app report oplysninger hvornår batteriet skal udskiftes. På selve æsken kan du også se hvornår du skal udskifte din kuliltealarm.
Where do you place your carbon monoxide alarm:
Honeywell says the installation of facilities as one bedroom apartments, caravans or boats, where living, kitchen and bedroom are in the same room, the alarm must be placed as far from the cooking appliances as possible, but close to, where the person sleeps.
You should be aware of, carbon monoxide has the same density as air and therefore allocated equally in the room. However, since carbon monoxide is formed by a combustion process, the gas is likely to warmer than the ambient air and will be forced up to the ceiling.
In caravans where living, kitchen and bedroom are in the same room, carbon monoxide alarm should be placed as far from the cooking appliances as possible, but close to where you sleep.
Carbon monoxide alarm should hang freely, it means that you must not place it behind the doors in a closed cabinet, and there must be free space around the carbon monoxide alarm, so it can detect carbon monoxide in the air.
You can choose and install your CO alarm on the ceiling or on a wall surface. Attaching the ceiling, it must be at least 300 mm from any wall. Place the can on a flat wall, your carbon monoxide alarm fitted at least 150 mm from the ceiling. In addition, it must be located 1-3 meters of gas boiler, refrigerator gas stove – This installation is in housing.
As a starting point: For campers / caravans / mobile homes, The same preferences, as for ordinary housing regarding the respective distances.
But for caravans and looked like small spaces, the alarm can be placed lower than the specified respective distance and near people's breathing zone.
Where should you install your CO alarm m.v. – If link:
We are very pleased with this Carbon Monoxide alarm from Honeywell who live all our requirements for a carbon monoxide alarm for use in caravan, camper, boat and home.
There are also good battery life and warranty 7 year 🙂 , and with NEW: Alarm Scan App for even some options.
It is also super good we should not think about changing batteries the next 7 year. Given it is a small amount you pay for, to install a quality carbon monoxide alarm, and thus optimize your safety and security – Should you install a carbon monoxide alarm.
Here you can buy Honeywell carbon monoxide alarm Link: Buy Carbon Monoxide Alarm XC70-EN
Below is a copy from Honeywell's brochures:
EN50291 defines the carbon monoxide level, where the unit should and should not go into alarm. The higher the concentration of carbon monoxide is, the faster the device sounds an alarm. It is based on, to carbon-monoxide poisoning effect determined by the carbon monoxide concentration and exposure time. Alarm point Erne ensures, the user always warned, when emergencies arise. Alarmniveauerne there: 50 ppm: Alarm between 60 and 90 minutes 100 ppm: Alarm between 10 and 40 minutes 300 ppm: Alarm in 3 minutes
Dangerous levels of carbon monoxide can be caused by faulty appliances, from which there begins to seep more and more carbon monoxide out over time. Pre-alarm provides an early warning of such situations, if activated, even if the alarm levels have not yet reached. If pre-alarms triggered frequently, it is recommended to call in a technician for further studies. Pre-alarm begins to give indications, when 25 % of the alert level (time and concentration) is reached. When, for example, the presence of carbon monoxide 43ppm, starts pre-alarm after 15-23 minutes
Low level monitoring mode:
To prevent unnecessary alarms caused by short-term peak values of carbon monoxide (eg. from cigarette smoke) prohibits the EN standard any alarm before 3 minutes with carbon monoxide presence or concentrations below 30ppm. Low-level-monitoring mode makes it possible to operate the device temporarily as a measurement unit. When the mode is activated, get the devices immediately the blue bleed-light to flash, if the CO level rises above 10ppm. Devices with a display also shows the current carbon monoxide levels.
The sensor plays an important role in ensuring a correct CO detection. Honeywell uses its own electrochemical cells: Ecosure® (7 year lifespan and warranty) Ecosure X® (10 year lifespan and warranty). More than 10 years of experience and strict quality control gives us assurance, that the cells operate throughout the life of the alarm.
Honeywell carbon monoxide alarms performing an automatic self-test of the electronics every 60. minutes.
Alarm Memory (End User):
Carbon monoxide leaves no trace, which can be detected by humans, and you may have a defective device, receiving the alarm to go ahead, while you are out. The memory function ensures, that the red light is flashing (LCD version also shows the levels PPM), until the button is pressed, and have passed 7 days.
event Logger (professional):
Honeywell carbon monoxide detectors detects an event history, which can be downloaded by professionals. It provides a more in-depth analysis of carbon monoxide incidents such as information on the concentration of carbon monoxide in the past 7 days and weekly maximum values throughout the life span. The dates for alarm events are recorded.
End of life:
Carbon monoxide alarms do not last forever and should be replaced after the date of end of life. The lifetime is mainly determined by carbon monoxide sensor. A standard for carbon monoxide detectors therefore requires, that all carbon monoxide alarms have a signal for end of life, which is implemented on all Honeywell carbon monoxide alarms.
Honeywell's X-Series alarms all have rubber-sealed houses. It protects the electronics from adverse environmental conditions such as. moisture and improves the reliability and service life. We have applied this technology with great success for many years in our commercial smoke alarms, subjected to particularly harsh environmental conditions.
There may be an alarm event, where you would like to do an extremely high lydalarms sums silent, for example, When you have the situation under control. By pressing the Alarm mute button on the device made the buzzer silent in 5 minutes. The alarm light continues to flash, as long as the unit detects a threat.
There is a common error, when the alarm warning of a nearly depleted battery. The alarm starts beeping once every minute accompanied by a flashing fejllys. Error silent allows you to make the buzzer silent in 24 hours and give you time to rectify the error. To restart the 24-hour timer in the morning, you can press the button again.
Test with reduced sound level:
The alarms must be tested regularly to ensure, that they are functioning correctly. When you press the Test button, start alarm POST, all lights are flashing, and alarm sounds. We have reduced the sound level for this test function significantly from the full alarm level 85 dB to protect your hearing. When you hold the button pressed, sounds the full alarm level.
Protected against abuse:
Professional landlords want to ensure, the installed alarms can not be disabled by their tenants. Our X-Series alarms have all sealed batteries, which can not be removed by the end user. Once they are installed, requires a tool (screwdriver) to switch off.
All Honeywell X-Series alarms lifetime batteries and carbon monoxide sensors - there are no additional charges for parts or labor for their installation. The only maintenance required is the occasional cleaning the product.
Inter Link allows you to connect multiple alarms for an alarm system. If either device goes into alarm, sounds all the other alarms also. It improves security significantly, especially in large buildings. All X-Series alarms upgraded to be connected wirelessly. *All electric-powered X-Series alarms can be connected with wire.
Power-operated alarms may face power failure. Therefore, all Honeywell electric-powered X-Series alarms fitted with a back-upbatteri.
Honeywell XS100-DA smoke detector with 10 year battery life and warranty and maintenance – No components need to be replaced. Link: Smoke detector XS100-EN